Table 6. Rear view of the system with two rear drives (continued)
Item
Ports, panels, or slots
Icon
Description
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
• To reset iDRAC using system ID, ensure that the system
ID button is enabled in the iDRAC setup.
• If the system stops responding during POST, press and
hold the system ID button (for more than five seconds) to
enter the BIOS progress mode.
Figure 8. Rear view of the system with no rear drives
Table 7. Rear view of the system with no rear drives
Item
Ports, panels, or slots
Icon
Description
1
Serial port
Enables you to connect a serial device to the system. For more
information, see the
2
PCIe expansion card riser 1B
(slot 2)
N/A
The expansion card slot enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
3
PCIe expansion card riser 1B
(slot 3)
N/A
The expansion card slot enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
4
PCIe slot 4
N/A
The expansion card riser enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
5
PCIe slot 5
N/A
The expansion card riser enables you to connect PCI Express expansion
cards. For more information on the expansion cards that are supported
on your system, see
6
Power supply unit (PSU)
N/A
For more information about the PSU configurations, see the
section.
7
Power supply unit (PSU)
N/A
For more information about the PSU configurations, see the
section.
8
LOM Riser Ethernet port
(2) (Optional) (slot 1)
The NIC ports that are integrated on the LAN on Motherboard (LOM)
riser provide network connectivity. For more information about the
supported configurations, see the
section.
14
System overview
