Figure 85. Installing the Mezzanine card on the PEM
Next steps
1
After installing the Mezzanine card on the system board,
2
Follow the procedure listed in the
After working inside your sled
section.
Optional internal USB memory key
An optional USB memory key installed inside your sled can be used as a boot device, security key, or mass storage device. To boot from the
USB memory key, configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in
System Setup
.
An optional USB memory key can be installed in the internal USB 3.0 port and can be used as a boot device, security key or mass storage
device.
The internal USB port is on the system board.
NOTE:
To locate the internal USB port on the system board, see the
System board jumpers and connectors
section.
Replacing the optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server module, the maximum permissible dimensions of the USB
memory key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1
Follow the safety guidelines listed in the
section.
2
Follow the procedure listed in the
Before working inside your sled
section.
Installing and removing sled components
115
