Installing the expansion card riser 1
Prerequisites
NOTE:
You must install an expansion card filler bracket over an empty expansion slot to maintain Federal
Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system
and aid in proper cooling and airflow inside the system.
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Align the screw holes on the riser with the screw holes on the chassis.
2. Lower the riser until the riser card is firmly seated in the slot.
3. Using a Phillips #1 screwdriver, tighten the screws that secure the expansion card riser 1.
Figure 22. Installing the expansion card riser 1
Next steps
1. Follow the procedure listed in
After working inside your system
Removing the expansion card riser 2
Prerequisites
NOTE:
Install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in
Before working inside your system
3.
Remove the expansion card riser 1
Installing and removing system components for PowerEdge C6525
47
