Dell EMC NX440, Инструкция по установке и обслуживанию

Страница: 71 / 102

Figure 35. Installing the air shroud
Removing the expansion card riser
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedures in Before working inside your system
3 Remove the air shroud.
Steps
1 Open the expansion card riser latch.
2 Holding the blue touch points, lift the expansion card riser from the system.
Figure 36. Removing the expansion card riser
3 If you are removing the riser permanently, install a filler bracket in the empty expansion slot and close the expansion card latch.
4 Using a Philips #2 screw driver, tighten the screw to secure the filler bracket to the system.
Disassembly and reassembly 71