Figure 134. Removing the riser board
1
Install the NPIO card.
2
Complete the procedure listed in After working inside your system.
3
Install any device drivers needed for the card as described in the documentation for the card.
Installing NPIO card in the rear bay
1
Follow the procedure listed in the After working inside your system.
2
Complete the procedure listed in Before working inside your system.
1
Remove the screws securing the riser bracket.
2
Remove the riser bracket from the chassis.
NOTE:
The PCIe bracket is customized for this system. Retain the bracket if replacing a new PCIe card for use with the new
PCIe card.
3
Align the holes on riser board with the holes on riser bracket.
4
Secure the riser board with screws.
180
Installing and removing server components