Installing trusted platform module
CAUTION:
Do not attempt to remove the Trusted Platform Module (TPM) from the server board. Once the TPM is installed, it is
cryptographically bound to that specific server board. Any attempt to remove an installed TPM breaks the cryptographic binding,
and it cannot be re-installed or installed on another server board.
NOTE:
This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified
service technicians.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Complete the procedure listed in Before working inside your system.
3
Remove the PCIe card.
1
Align the trust platform module into the server board connector and insert it.
NOTE:
To locate the TPM connector on the server board, see the server board connectors section.
Figure 47. Inserting the trust platform module
2
Flip down the TPM. Make sure it is secured on the server board.
92
Installing and removing server components
