Locating
Pins
FIG. 6
To fit the front whee
l; first check that the quick release lever on the front wheel
axle is released (see fig. 5). Locate the ends of the axle into the front forks and lock
the
quick release lever.
PULL THE WHEEL TO CHECK THAT IT IS SECURE.
DEPLOY THE ANTI- TIPPER AND ENGAGE THE PARK BRAKES
BEFORE PUTTING SOMEONE INTO THE BUGGY.
To deploy the anti-tipper
; push down gently with your foot on the stainless steel
tube and flip it into the centre where it clicks into place; push down near to the bend
in the tube not on the end.
To fold down the footrest;
pull the two rings on the underside of the footplate to
retract the spring loaded locating pins and fold down – the pins should release easily
do not force them. Let go of the rings to lock the footrest in place.
The height of the footrest may need to be adjusted
before use - see instructions below.
The footrest can be removed to make more
space during transfer in or out of the buggy.
To remove the footrest pull on the locating
pins and fold the footrest up as far as it will go;
keeping hold of the rings lift the footrest
upwards parallel to the frame tube.
The foot-straps are designed to be long
enough to remain under the loops on the
footrest while positioning the foot.
Pg
.8
Quick Release
Lever in Locked
Position
FIG. 5
