DeLaval MM27BC, Профилактическое обслуживание

Страница: 4 / 22

The testing procedure should be carried out
with meters that are cleaned properly, i.e. after
good parlour cleaning cycle.
The purpose of the periodic checking is to
determine whether the MM27BC is still func-
tioning as it did at the time for the installation
and calibration. Reference values and infor-
mation shall be noted at the time for calibration
of the MM27BC milk meter. The new values
at the time for the periodic check should be
noted and compared with the initial values. See
Chapter 3.1 "Periodic routine test form." .
If one or more out of the mentioned tests fail,
the meter should be cleaned, checked again
and replaced.
Note! Note! Note! Note! A test probe belongs to each installation
and should be contained on the premises, safe
from mechanical damage and dirt.
MM27BC visual inspection
MM27BC visual inspection MM27BC visual inspection
MM27BC visual inspection
Milking parlour parameters
Milking parlour parameters Milking parlour parameters
Milking parlour parameters
Fig. 1: Test probe with optical properties that
simulates milk. The test probe fits exactly the
interior oft the MM27BC milk channel.
vm
x_
10
71
59
Fig. 2: The MM25 tool brush can be introduced
into the MM27BC to remove dirt without damag-
ing the milk meter body.
1.
1. 1.
1. Check the milk unit from cluster to meter
for abnormalities with respect to lea-
kages, broken tubes, constrictions and so
on.
Visually inspect the MM27BC measuring
channel to detect dirt, protrusions or
other abnormalities, which may effect the
performance of the milk meter.
2. 2. 2. 2. A general visual test of all milking compo-
DeLaval milk meter MM27BC DeLaval milk meter MM27BC DeLaval milk meter MM27BC DeLaval milk meter MM27BC
161 Preventive maintenance
4 (22) © DeLaval 2012.All rights reserved.
Printout from Memoviewer 11/6/2012.