6
8.1
9
10
Install Drive-in Latch
Drive the latch (D) into the hole on edge of
door.
9. Mark the Outline of Strike
To identify the centre of strike: close the
door to lay the latchbolt against the door
frame. Mark the centre line on the doorframe
exactly opposite the latch hole in the door
edge.
10.1 Drill Hole on Door Frame
Measure one half of door thickness from door
stop and vertically mark centre line of strike.
Drill 1" (25.4 mm) hole, 1" (25.4 mm)
deep at intersection of horizontal and vertical
line of strike.
10.2 Chisel Space for Strike
Chisel 5/64" (2 mm) deep along the strike
outline to allow the strike to be aligned with
the doorframe.
D
D
ASSEMBLY INSTRUCTIONS
