16
After installing the lockset
and batteries, the door
can’t be locked and three
short beeps are emitted
when you press the
lock button.
The door-handing
identification process
isn’t yet complete.
Refer to step1, page13.
You’ve installed the
lockset and batteries, but
you still get no response
when you press any
button.
Batteries were installed
incorrectly and cable
connect incorrectly.
Check to see if the battery
polarities have been
reversed or if the battery is
dead. If so, re-install or
change the battery. If not,
please check to see if the
cable is properly
connected.
When you are in the
door-handing identifying
process, you hear three
times, and three short
beeps.
Wrong door-handing or
change of the
door-handing in the
memory.
Press the R button to
restore the system to
factory default setting and
re-execute door-handing
identifying process
(
step 1, page 13)
Although you succeeded
in the first execution of
the door-handing
identifying process, the
latch still doesn’t work.
(i.e. You can feel the motor
attempting to run.)
Low battery.
Replace with new alkaline
batteries.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
TROUBLESHOOTING
