WARNING
Do not remove tape
Slot at the bottom
18
2X
A
4" or
5-1/2"
2 1/8" (54mm ) Hole saw
1" (25mm )
Install long screws
on door stop side
For maximum
security, install
reinforcing plate
Door stop
2
1
3
DO NOT REMOVE TAPE
1
2
14
3
6
7
5
25
26
23
8
13A
21
11
9
18
4
17
24
10
12
28
20
27
27
13B
22
19
15
16
Saffire LX-I Installation Guide for door
thickness 1 3/8" to 2 1/8"
Please read and follow all directions carefully.
1.
This lock is not designed to be used on emergency exit doors
.
2.
Carefully inspect glass, door frame, door etc. to ensure the recommended procedure will not cause damage.
3.
dormakaba
standard warranty does not cover damages cause by installation.
Wear safety glasses when making the holes.
4.
All the following operations and testing of the lock to be done with door open.
5.
ADJUST BACKSET OF DEADBOLT
2.
INSTALL DEADBOLT IN DOOR
3.
Safety glasses
•
1/2” (13mm) Chisel
•
1/8” (3mm) Drill Bit
•
5/32” (4mm) Drill Bit
•
1” (25mm) Drill bit or Hole Saw
•
2 1/8” (54mm) Drill bit or Hole
•
Saw
Drill
•
Awl or Center Punch
•
Screwdriver, 1/8" Slotted
•
Philips Screwdriver #2
•
Adjustable Square
•
Tape Measure
•
1C - DOOR PREPARATION
TOOLS REQUIRED
The deadbolt is pre-set at 2 ¾" (70mm) backset. Proceed as
illustrated to change to 2 ⅜" (60mm) backset, if required.
Determine which template fits your Saffire LX-I lock installation, either
1.
2 3/8" (60mm) or 2 3/4" (70mm) backset, 4" or 5 1/2" center to center.
Place appropriate template (supplied) onto door and mark holes.
2.
Drill holes as per dimensions on the template. The 1" (25 mm) hole to
3.
be on the center line of door thickness.
Mortise door edge for dead bolt face plate and latch bolt face plate.
4.
Drill 2 1/8" from both sides of the door to prevent unsightly damage.
5.
A = Backset = 2.3/4"(70mm) or 2 3/8" (60mm)
PART LIST & LOCK DIAGRAM
1B - INSTALL STRIKE ON STEEL FRAME
1A - INSTALL STRIKE ON WOOD FRAME
Please continue on next page.
For thicker door please see order guide.
PK3710 - Rev 2
dormakaba Canada inc.
7301 Boul Décarie
Montréal QC H4P 2G7
Canada
1-877-468-3555
www.kabalodging.com
ITEM
NO. QTY
DESCRIPTION
1
1 FRONT UNIT ZINC HOUSING
2
1 GASKET - FRONT LOCK HOUSING
3
1 TAIL PIECE
4
1 BACK PLATE - INSIDE TRIM
5
1 INSIDE TRIM COVER ASSEMBLY
6
1 DEAD BOLT
7
1 LATCH
8
1 HANDLE ASSEMBLY - OUTSIDE
9
1 STRIKER PLATE AND DUST BOX KIT
10
2 REINFORCING PLATE
11
2 DUST BOX
12
1 STRIKER PLATE
13A
1 SPINDLE ASSEMBLY
13B
1 SPINDLE & RETAINING RING ASSEMBLY
14
1 MESSENGER CABLE (OPTIONAL)
15
1 POWER CABLE
16
1 EXTENSION CABLE (OPTIONAL)
ITEM
NO. QTY
DESCRIPTION
17
3 PAN HEAD SCREW PHILLIPS, 10-24 x 1-1/4"
18
2 WOOD SCREW PHILLIPS, #8 X 1"
19
4 FLAT HEAD SCREWPHILLIPS, 8-32 X 1/2"
20
2 FLAT HEAD SCREWPHILLIPS, 8-32 X 7/32"
21
2 WOOD SCREW PHILLIPS, #8 X 3"
22
1 PAN HEAD SCREWTORX, 6-32 X 3/16"
23
3 AA BATTERY
24
2 PAN HEAD SCREW PHILLIPS 8-32 X 3/4" OR 1 1/4"
25
2 PAN HEAD SCREW PHILLIPS 6-32 X 1/2"
26
1 REMOVABLE COVER
27
4 COMBO SCREW PHILLIPS #8 X 1"
28
2 COMBO SCREW PHILLIPS #8 X 1"
