DEJELIN BO-WK2200BL, Руководство пользователя

Страница: 9 / 16

9
EN
After a certain number of uses, a thin film of limestone can appear on the bottom and in the inside
of your kettle.
It is then recommended to descale the appliance.
To do so:
- Fill your kettle up to the maximum level (1,7) with a mix of water and white vinegar with a ratio of
2 volumes of water for 1 volume of vinegar. Never fill by the spout and avoid wetting the handle.
- Bring to a boil at 100°C and let set during one night.
- The following morning, empty the water and boil fresh water various times at 100°C until the
vinegar taste disappears.
OVERHEAT SAFETY
DESCALING
- The kettle is equipped with a overheat safety system which will start if you boil an insufficient
quantity of water. In this case, the kettle automatically stops. All lights switch off.
- Remove the kettle from the power base (7) and let it cool during minimum 45 minutes before
reusing it.
- Unplug and let the appliance cool before putting water in again.
NOTE
For serious scaling, use a dedicated descaling
product commercially available verkrijgbaar is.
CLEANING AND MAINTENANCE
BODY AND EXTERIOR BASE
- The exterior of the kettle and the power base
(7) can be cleaned with a soft, slightly moist
cloth.
- Carefully dry the power base (7) before using
the appliance.
IMPORTANT NOTES
- Never use abrasive products
- Never immerse the base and the kettle in
water or any other liquids.