manualshive.com logo in svg

Deif PPU 300, Руководство оператора

Поделиться
Скачать
Deif PPU 300 Скачать руководство пользователя страница 61

•

To clear all the 

Enabled

 functions, select 

Clear 

Clear

.

•

To save the setting(s) to the controller, select 

Write 

.

◦

This only applies to the selected functions and does not apply to other I/O change(s).

7.8.4 Configure alarm(s)

The alarms available for a digital output (DO) are organised in categories and groups, which are similar to a tree structure view.

INFO

When viewing or configuring a previously configured I/O with an alarm, the display will automatically jump to the alarm

settings. You can, if required, use 

Back 

 to return to the alarm selection screen.

Selecting an alarm

1. Highlight a category or group, by pressing 

Up 

 or 

Down 

.

2. Select the highlighted category or group, by pressing 

OK 

.

•

A further group may be shown or the alarm list to select the actual alarm(s).

•

If a further group is shown, simply repeat step 1 to locate and open the required group.

3. Highlight the required alarm, by pressing 

Up 

 or 

Down 

.

•

Details of the alarm settings are shown at the right side of the display.

•

OPERATOR'S MANUAL 4189341099G UK 

Page 61 of 130

Содержание PPU 300



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды