From this screen you can configure either a standard relay or a changeover relay, depending on the type of relay that can be
connected to the hardware module terminals.
Figure 7.7
Example relay setup
More information
See
Hardware characteristics and configuration
in the
Designer's handbook
for more information about the hardware
modules that support relays.
Configure the relay
1. You can set the relay as either
Energised
or
De-energised
.
•
The current setting is shown on the display.
2. You can set the relay as either
Energised
or
De-energised
.
3. To set as
Energise
select
Energised
Energised
.
4. To set as
De-energise
select
De-energised
De-energised
.
5. To save the setting to the controller, select
Write
.
•
You are returned to the terminal screen.
7.8.3 Configure function(s)
The functions available are organised in categories and groups, which are similar to a tree structure view.
Selecting a function
1. Select
Functions
Functions
.
•
The function groups are shown on the display:
OPERATOR'S MANUAL 4189341099G UK
Page 58 of 130
