2
As well as the safety advice listed in this manual and the proper use, the following safety conditions apply:
• Accident prevention regulations, safety and operating conditions
• Safety conditions when dealing with hazardous substances
• Valid standards and legislation, particularly the following standards: DIN EN 12056,
DIN 1988, DIN 1986, DIN EN 1717, DIN
EN 806.
• Non-compliance with this manual will lead to the loss of any warranty and claims for damages.
• Non-compliance can result in the following risks:
−
Danger to persons use to electrical, thermal, mechanical and chemical impacts
−
Failure of important functions of the product
−
Failure of instructed methods for maintenance and repairs
−
Danger to the environment due to the leakage of hazardous substances
The
Watermanager GWM
has been designed and constructed under whilst taking into account a risk assessment and after
careful selection of the harmonised standards to be complied with and other technical specifications. This means the product
conforms to the state of technical knowledge and guarantees a maximum level of safety. But this safety can only be achieved in
operational practice if all the measures required for this are met. It is the
Watermanager
GWM operator’s duty of care to plan
these measures and check their execution. In particular, the operator must ensure that
•
the
Watermanager GWM
is only used as intended.
•
the
Watermanager GWM
is only operated in a flawless, functional state.
•
the manual is always in a legible condition and available in its entirety at the
Watermanager GWM’s
place of use.
•
only sufficiently qualified and authorised personnel assemble the
Watermanager GWM,
commission it, repair it and carry
out maintenance on it.
•
these personnel are regularly instructed in all the relevant issues of occupational safety and environmental protection, as
well as ensuring that they have read and understood the manual and, specifically, the safety advice contained therein.
•
none of the safety and warning signs attached to the
Watermanager GWM
are removed and that all remain in a legible
state.
•
any additional risks which arise due to the specific working conditions at the place of use of the
Watermanager GWM
are
recognised as part of a risk assessment (in the sense of the German Occupational Safety and Health Act § 5 or the equiva-
lent legislation in the country of use).
•
all additional instructions and safety advice arising from the risk assessment are complied in a user guide (in the sense of
German Work Equipment Usage Ordinance § 6 or the equivalent legislation in the country of use).
•
the duct routing is dimensioned sufficiently.
•
The machine may only be altered or modified with the consent of the manufacturer.
•
Only use original parts or those authorised by the manufacturer. Using other parts can void your warranty for any conse-
quences resulting there from.
•
Only work on the machine when it is turned off.
•
The parts of the system must be at the ambient temperature.
•
Ensure the inspection/maintenance procedures described in the manual are complied with exactly.
1.4.
Further safety conditions
1.5.
Consequences and risks of non-compliance with the manual
1.6.
Duty of care of the operator
1.7.
Safety advice for maintenance, inspection and assembly work
