13
Only in associations with submersible booster pump!
The submersible booster pump has to be installed on site. Connect the HDPE-pipe via quick-connector on the pressure outlet of
the booster pump. Open the process water storage tank and place carefully the booster pump on the tank bottom. Connect the
other side of the HDPE-pipe with the corresponding quick connector at the tank. Connect the electrical quick-connector with the
corresponding connector at the tank.
Place the booster pump vertically on the tank bottom to avoid malfunctions.
Don´t transport, lift or hang the booster pump by the electric cable.
Figure 6: connection of HDPE-pipe and booster pump
Figure 7: installation of booster pump into tank
5.6.
Installation of submersible booster pump into process water storage tank
