Degelman STRAWMASTER PRO 100 Скачать руководство пользователя

Страница: 9 / 39

-3-

142646 - Strawmaster PRO (21-June-2018)

Safety

YOU

are responsible for the safe operation and

maintenance of your equipment.

YOU

must ensure that you and anyone else who

is going to operate, maintain or work around

the equipment be familiar with the operating

and maintenance procedures and related

safety

information contained in this manual.
Remember,

YOU

are the key to safety. Good safety

practices not only protect you but also the people

around you. Make these practices a working

part of your safety program. Be certain that

EVERYONE

operating this equipment is familiar

with the recommended operating and maintenance

procedures and follows all the

safety

precautions.

Most accidents can be prevented. Do not risk injury

or death by ignoring good safety practices.

• Equipment owners must give operating

instructions to operators or employees

before allowing them to operate the

equipment, and at least annually thereafter

per OSHA regulation 1928.51.

• The most important safety device on this

equipment is a

SAFE

operator. It is the

operator’s responsibility to read and

understand ALL Safety and Operating

instructions in the manual and to follow

these. All accidents can be avoided.

• A person who has not read and

understood all operating and safety

instructions is not qualified to operate the

machine. An untrained operator exposes

himself and bystanders to possible serious

injury or death.

• Do not modify the equipment in any way.

Unauthorized modification may impair the

function and/or safety and could affect the

life of the equipment.

• Think

Safety

! Work

Safely

SAFETY

1. Read and understand the Operator’s

Manual and all safety signs before

operating, maintaining or adjusting.

2. Install and properly secure all shields and

guards before operating. Use hitch pin with a

mechanical locking device.

3. Have a first-aid kit available for use

should the need arise and know

how to use it.

4. Have a fire extinguisher available

for use should the need arise and

know how to use it.

5. Wear appropriate protective gear.

This list includes but is not limited to:

• A hard hat
• Protective shoes with slip resistant soles
• Protective glasses or goggles
• Heavy gloves
• Wet weather gear
• Hearing protection
• Respirator or filter mask

6. Clear the area of people, especially small

children, and remove foreign objects from the

machine before starting and operating.

7. Do not allow riders.

8. Stop tractor engine, set park brake, remove

ignition key and wait for all moving parts to

stop before servicing, adjusting, repairing or

unplugging.

9. Review safety related items with all operators

annually.

GENERAL SAFETY

Содержание STRAWMASTER PRO 100








































Результаты поиска

Содержание STRAWMASTER PRO 100

Отзывы:

Похожие инструкции для STRAWMASTER PRO 100

Бренды по названию

Популярные бренды

Degelman STRAWMASTER PRO 100, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание STRAWMASTER PRO 100

Отзывы:

Похожие инструкции для STRAWMASTER PRO 100

Бренды по названию

Популярные бренды