Degelman STRAWMASTER PRO 100 Скачать руководство пользователя

Страница: 18 / 39

-12-

142646 - Strawmaster PRO (21-June-2018)

Service & Maintenance

MAINTENANCE CHECKLIST

After reviewing the Maintenance and Hydraulic

Safety Information, use the Maintenance Checklist

provided for regular service intervals and keep a

record of all scheduled maintenance:

( Initial break-in review. )

Before using:

1. Read Safety Info. & Operator’s Manual.
2. Complete “Pre-Operation Checklist”

3. Check all Bolt Tightness.

After operating for

2 hours

1. Check all hardware. Tighten as required.
2. Check all hydraulic system connections.

Tighten if any are leaking.

After operating for initial 2 hours:

1. Check all hardware. Tighten as required.
2. Check all hydraulic system connections.

Tighten if any are leaking.

After operating for initial 8 hours:

1. Check all hardware. Tighten as required.
2. Check all hydraulic system connections.

Tighten if any are leaking.

3. Re-torque all bolts on harrow sections

and mounting brackets.

Daily - 8 Hours

• Hydraulic Fluid Leaks
• Damaged Hoses
• Check Tire Pressure

Tires:

550/45 x 22.5:

41 PSI

(283 kPa)

Weekly - 25 Hours

• Wheel Cylinder Pins & Pivot Bushing
• Ratchet Jack Pins
• Check Tine Wear
• Clean Safety Signs

Annually - 200 Hours

• Bolt Tightness
• Wheel Bearings
• Latch Mechanism

TORQUE

all hardware

MAINTENANCE SCHEDULE

MAINTENANCE SAFETY

• Review the Operator’s Manual and all safety items

before working with, maintaining or operating the

Strawmaster Pro.

• Lower to ground, stop engine, place all controls

in neutral, set park brake and remove ignition

key before servicing, adjusting, repairing, or

unplugging.

• Keep hands, feet, clothing and hair away from all

moving and/or rotating parts.

• Clear the area of bystanders, especially children,

when carrying out any maintenance and repairs or

making any adjustments.

• Place safety stands or large blocks under the frame

before removing the tires or working beneath the

machine.

• Be careful when working around or maintaining a

high pressure hydraulic system. Wear the proper

hand and eye protection when searching for a pin

hole leak in a hose or fitting.

• Always relieve pressure before disconnecting or

working on hydraulic system.

Содержание STRAWMASTER PRO 100








































Результаты поиска

Содержание STRAWMASTER PRO 100

Отзывы:

Похожие инструкции для STRAWMASTER PRO 100

Бренды по названию

Популярные бренды

Degelman STRAWMASTER PRO 100, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание STRAWMASTER PRO 100

Отзывы:

Похожие инструкции для STRAWMASTER PRO 100

Бренды по названию

Популярные бренды