Defensor Defensor H15A, Руководство по обслуживанию

Страница: 36 / 46

36
6. Reconnect all cables (see wiring diagram in the appendix).
7. PH15/PH15A and PH27/PH27A: close cover of the electronic compartment and fix it with the 4
screws (Torx 15). Then, insert air inlet lattice (PH15/PH15A) / air outlet lattice (PH27/PH27A) .
PH28/PH28A: carefully flap the cover of the electronic compartment downwards and fix the
cover with the two Phillips screws. Then, insert the three air outlet grills in the desired position
into the unit.
8. Put unit into operation and reconfigure the unit.
3. Disconnect all cables.
4. Carefully pull off control board from the fixing pins, then remove the control board.
5. Place new control board in the correct position on the fixing pins, then carefully push the control
board down until it comes to a stop.