Defensor Defensor H15A, Руководство по обслуживанию

Страница: 18 / 46

18
7. Fix connecting cables with each a washer and a M6 nut to the ionization rod holders as shown
in the illustration above.
8. Attach float protection cover to the float mounting support.
9. Undo 4 screws of the cable duct cover “E” and remove cable duct cover.
10. Undo the 4 screws (Torx 15) of the cover of the electronic compartment and flap the cover to
the side.
Attention! The electronic components on the control board are very susceptible to electrostatic
discharges. For the protection of these components, measures must be taken for all work on the
control board to prevent damage caused by electrostatic discharge (ESD–protection).
11. Lead the connecting cable in the cable duct upward into the electronic compartment. Fix the
cable with the existing cable fasteners. Then, reattach the cable duct cover and fix it with the 4
screws.
E