Defender Security 82-13285, Инструкция по установке и эксплуатации

Страница: 21 / 23

17 / 19
Screen 8: PATTERNS
A pattern is a sequence of movements and functions which may be stored and repeated manually or automatically.
Option Value Explanation
PATTERN NUMBER 1 ~ 4 This option is used to select a pattern.
PROGRAM PATTERN This submenu is used to program a pattern (see below)
CLEAR PATTERN
This submenu is used to delete a pattern (see below)
CLEAR ALL PATTERN
Table 1
PROGRAM PATTERN submenu
This includes all the operations needed to program a pattern.
8)
Use the joystick to point the cursor to the ”
PATTERN NUMBER
”option.
9) Select the required pattern and press
OPEN
.
10) Position the cursor under ”
PROGRAM PATTERN
”option and press the
OPEN
button.
Screen 9: PROGRAM PATTERN
The number of actions available (including zoom operations) for programming the Pattern is shown in percentage form
on the screen while they are each being programmed. 100 operations are available for each pattern.
CLEAR PATTERN submenu
This includes the operations for deleting the selected pattern.
4.2.5. CRUISE
Point the cursor to the label”CRUISE” by moving the joystick vertically. Press
OPEN TO NEXT STEP:
Screen 10: CRUISE
The
CRUISE
function is used to make the camera run a cycle consisting of up to 30 preset positions.
This menu item is used to enable each of the preset positions used in the cruise cycle.
For the cruise cycle to be effective, the preset positions must be actually stored.
Option Value Explanation
PATTERNS
PATTERN NUMBER 4
<PROGRAM PATTERN>
CLEAR CURRENT PATTERN
CLEAR ALL PATTERN
BACK
EXIT
PROGRAM PATTERN
USE THE JOYSTICK OR
KEYBOARD TO MOVE THE
CAMERA TO THE
STARTING POSITION
IRIS OPEN TO CONTINUE
CRUISE
DWELL TIME [SECS] 6
PRESET LIST 1
1 ON 0 OFF
1234567890 PRESET
1111111111 [1-10]
BACK