Defender Security 82-13285, Инструкция по установке и эксплуатации

Страница: 19 / 23

15 / 19
Screen 4: MOTION
Option Value Explanation
NONE No action is performed at the end of power up.
AUTO SCAN
The camera performs an auto scan at the end of power up: the
camera performs a 360 horizontal scan operation.
RANDOM SCAN
The camera performs a random scan at the end of power up:
the camera performs a random 360° scan pausing for
approximately 2”every 142°.
FRAME SCAN
The camera performs a frame scan at the end of power up:
the horizontal scan is performed in the SET SCAN limits.
PRESET 1/ PRESET 8 The camera goes to preset 1 or 8 at the end of power up.
PATTERN 1 ~ 4
The camera performs one of the 4 patterns at the end of
power up.
POWER UP ACTION
CRUISE
The camera performs a cruise at the end of power up: the
camera runs a cycle consisting of up to 30 preset positions.
PARK TIME: With this function, the camera will resume the function defined in ”
PARK TIME ACTION
”by specifying a
value (
15S…59S
, 1m
…59
m, 1h
…12
h steps) following a stop or interruption of the performed function and after the
programmed time.
Option Value Explanation
NONE No action is performed at the end of the park time.
AUTO SCAN
The camera performs an auto scan at the end of the park
time: the camera performs a 360 horizontal scan operation.
RANDOM SCAN
The camera performs a random scan at the end of the park
time: the camera performs a random 360 degree scan
pausing for approximately 2”every 142°.
FRAME SCAN
The camera performs a frame scan at the end of the park
time: the horizontal scan is performed in the
SET SCAN limits.
PRESET 1/PRESET 8
The camera goes to preset 1 or preset 8 at the end of the park
time.
PATTERN 1 ~ 4
The camera performs one of the 4 patterns at the end of the
park time (command sequence continuously performed).
CRUISE
The camera performs a cruise (preset sequence) at the end of
the park time: the camera runs a cycle of up to 30 preset
positions.
PARK TIME ACTION
REPEAT LAST
The camera simply resumes the operation it was performing
before being interrupted at the end of the park time.
FRAME SCAN SPEED: This will specify the rotation speed for automatic Framel scans:1~32.
BACK: go back to the previous level menu
EXIT: Exit the OSD menu
To change the Value of the “option”:
MOTION
<SET FRAME SCAN>
POWER UP PATTERN 4
PARK TIME 15S
PARK ACTION PATTERN 4
FRAME SCAN SPEED 16
BACK
EXIT