5
When used on horizontal surfaces, fully insert the dispensing tip
into the PosiPatch. On vertical surfaces, insert the dispensing tip
only as far as is needed to see the tip inside the PosiPatch.
a)
a)
b)
c)
b)
c)
Option B: Bresle Method DeFelsko Patch (or equivalent)
a)
Remove the backing and foam center from the patch, taking
care not to touch the interior surface.
b)
Press the patch firmly onto the surface making sure most of
the air escapes.
c)
Pierce the top of the patch at the foam perimeter, allowing the
needle to penetrate into the center of the patch.
d)
Inject half of the water into the patch. Then, use the syringe to
withdraw trapped air.
e)
Remove the needle, point it upwards and expel the air.
f)
Re-insert the needle and inject the remaining water into the
patch.
