Reset
(menu Reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, batch names and screen
captures are erased.
- Calibration adjustments are returned to factory settings.
- The last stored background measurement (
γ
1
) is erased.
- Menu settings are returned to the following:
1.
Power down the Gage and wait 5 seconds.
2.
Simultaneously press and hold the
and buttons until
the
Reset
symbol appears.
This returns the Gage to a known, “out-of-the-box” condition. It
performs the same function as a menu
Reset
with the addition of:
9
- Date, Time and WiFi settings are not affected by either
Reset
.
Reset
Setup Menu
Memory
= OFF
Bresle Mode
= ON
Auto Dim
= ON
Display
= None
Patch Volume
= 3.0 ml
Hi Res
= OFF
Bluetooth & Stream
= OFF
WiFi & Access Point
= OFF
USB Keyboard & Stream
= OFF
BLE Keyboard
= OFF
Surface Density units
= mg/m2
Temperature units
= °C
Units
Perform a more thorough
Hard Reset
as follows:
Flip Lock
= OFF
Backlight
= Normal
Auto Sync .net
= ON
Sound
= Medium
Touch
= ON
Language
= English
Battery Type
= Alkaline
Bluetooth Smart
= OFF
USB Drive
= ON
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following status:
NOTE:
Allows the operator to change the displayed units for both
Temperature (°C or °F) and Surface Density (mg/m
2
or µg/cm
2
).
