29
Qty. Product
1
Termini™ - interior heater with holder
1
SmartStart™ - Remote control (hand-held timer)
1
SmartStart™ - VU = unit to install in the engine room
1
MultiCharger 1203 - battery charger/relay
1
Extension cable (0.5 m)
1
Extension cable (1.0 m)
1
Extension cable with interior heater plug (1.75 m)
1
DEFA MiniPlug cable (1.5 m)
1
Connection cable (2.5 m)
1
Wiring harness for SmartStart™ and MultiCharger/charger
Fastening accessories for MiniPlug
Qty. Product
1
Fastening nut
1
Flat washer for nut for curved surfaces
1
O-ring for fastening nut
1
Holder
1
Spacer for holder
2
Black stainless steel bolt M4x20 mm
2
Fastening bolts for PlugIn the holder (3x7 mm)
2
Fastening plugs for the holder
1
Self-tapping screw (4.2x13 mm)
Fastening accessories for other components
Qty. Product
3
Fastening bolts (3.5x16 mm) for Termini™ holder
8
Fastening strips (200 mm) for extension cable
1
Fuse holder with 5A fuse
1
MultiCharger cable (200 mm) between fuse holder and battery
1
Rubber bushing
1
Fastening bolt (4.2x16 mm) for MultiCharger holder to chassis
1
Fastening bolt (4.2x32 mm) for MultiCharger to holder
1
Holder for battery charger
1
Antenna fastening rail
The MultiCharger cable (200 cm) between the fuse holder and battery may not be shortened. If the cable has
to be extended, the cross section must also be enlarged.
Double the length = double the cross section
Preparing for installation
The workshop/garage is always responsible for taking all necessary precautions when installing
DEFA WarmUp. Avoid locating units too close to high temperature engine components like the exhaust system,
turbo etc. Ensure proper distance from rotating or moving parts such as the alternator and steering rod.
Consists of
ENGLISH
