Dedrone RF-300 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Dedrone RF-300 Скачать руководство пользователя страница 7

IM-Inst-RF300en v12.0

Dedrone

7

Scope of Delivery

1 x

RF-300

1 x

Wi-Fi antenna

1 x

RF Mounting Plate (preassembled)

2 x

Knurled head screw with sealing washer (preassembled)

2 x

Knurled nut (preassembled)

1 x

Pole Mount

2 x

Strap

1 x

Bag with 4x screws Torx M5, 8x flat washer, 4x nuts

1 x

Bag with 1x environmentally sealed Ethernet crimp connector, 1x RJ45 plug

1 x

Installation manual

1 x

Safety information

1 x

Product registration document

(this information is only needed for a cloud based sensor operation and is

provided by an enclosed document or online by the Dedrone Service)

The original packing carton is the safest container in which to transport the unit and must be used if
returning the unit for service. Save it for possible future use.

4 Scope of Delivery

Verify that all the parts listed in the scope of delivery are included. If any items are missing, notify
your Dedrone Partner.

Do not use this product if any component appears to be damaged. Please contact Dedrone in the
event of damaged goods.

5 Select the Mounting Place

5.1 Mounting Location

The position of the RF-300 has strong impact to the detection and direction finding range and ac-
curancy. The RF-300 is intended for pole mounting. Make sure that a suitable pole is available (dia-
meter between 1.2 in to 3.5 in (40 mm to 90 mm)) and the Antenna Cover extend beyond the pole.

The detection is the precondition for the direction finding.

5.1.1 Detection Conditions

For ideal results the location should fulfill the following conditions:



Clear view over the area



Exposed, elevated position (minimum 10 ft (3 m))

«
...
5
6
7
8
9
...
»

Содержание RF-300





















Отзывы:

Нет отзывов