IM-Inst-RF300en v12.0
Dedrone
5
Safety
Note
: This equipment has been tested and found to comply with the limits for a Class A digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti-
on against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Modifications
: Any modifications made to this device that are not approved by Dedrone GmbH may
void the authority granted to the user by the FCC to operate this equipment.
Caution!
To prevent permanent exposure, the device should be installed and operated with a
minimum distance of 20 cm (7.87 in) between the device and your body.
1.3 Safety Information
Read, follow and retain all of the following safety instructions. Heed all warnings on the unit and in
the operating instructions before operation.
Warning! Setup should be carried out by trained personnel only, in accordance with the
national electric code, ANSI/NSPA, and all local country codes.
Do not attempt to service this device yourself. Refer all servicing to qualified service per-
sonnel. This device has no user-serviceable internal parts.
Whenever any damage to the device has occurred, unplug the devices from the power
source by disconnecting the patch cable and refer servicing to qualified service personnel.
Such damages can be:
•
the patch cable is damaged
•
an object has fallen on the device
•
the device has been dropped, or its enclosure has been damaged
•
the device does not operate normally when the user follows the operating instruc-
tions correctly
Adjust only those controls specified in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
Despite careful construction, electrical devices can cause fires. Do not mount the RF-300
in areas containing highly flammable materials or gases. Do not mount the RF-300 in a
potentially explosive atmosphere.
Do not install product near any heat sources such as radiators, heaters, exhaust air sys-
tems or other equipment (including amplifiers) that produce heat.