20181270 CR v8-2019Page 8
Important
Never remove or cover the labels and data plates affixed to appliances.
Labels and data plates must be legible throughout the entire lifetime of the appliance. Immediately
replace damaged or illegible instructions and warning stickers.
Important
Remove the casing only to perform maintenance and repair work. Put the casing back in place after
maintenance and repair work.
Important
Keep this document close to the place where the appliance is installed.
Caution
Do not make any modifications to the air conditioner without the written consent of the manufacturer.
Warning
In accordance with the NFC C15-100 electrical safety standard, only qualified professionals are
permitted access to the inside of the appliance.
Warning
Ensure correct earthing.
Install the heat pump on a solid, stable structure able to support its weight.
Do not install the air conditioner in a location with an atmosphere which is very high in salt.
Do not install the air conditioner in a location that could become covered with snow.
Warning
Refrigerant fluid
Only use R32 refrigerant fluid to fill the system.
Use tools and pipe components especially designed for use with R32 refrigerant fluid.
Use copper pipes deoxidised with phosphorus to carry the refrigerant fluid.
Use beading to guarantee the tightness of the connections.
Store the refrigerant connection pipes away from dust and humidity (risk of damage to the compressor).
Cover both ends of the pipes until the beading process.
Do not use a load cylinder.
