15
El aparato está provisto de dos escuadras (D) para
fijarlo lateralmente al mueble; para su aplicación ver
les indicaciones de la Fig.
Montar las caperuzas (E).
Terminada la operación de reversibilidad de la
puerta, controlar que la empaquetadura
magnética esté adherida al mueble. Si la
temperatura ambiente es fría (por ejemplo en
invierno), puede suceder que la empaquetadura
no adhiera perfectamente al mueble. En este
caso esperar que la empaquetadura se recobre
en forma natural o bien acelerar dicho proceso
calentando la parte interesada con un normal
secador de cabellos.
D
E
D734
Ha
8mm
K
Quitar las escuadras y marcar a 8 mm del borde
externo de la puerta con el clavo (K).
PR167/1
Hd
Hb
PR168
Hb
En caso de que sea necesario alinear la puerta del
mueble, utilizar el juego de los agujeros de ojal.
Al término de las operaciones es preciso controlar
que la puerta del aparato esté cerrada
correctamente.
Introducir la tapa (Hd), presionándola hasta oír el
resorte, en la guía (Hb).
30
CONTENTS
Warnings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Use
- Cleaning the interior - Operation - Temperature regulation - Fresh food refrigeration . . . . . . . . . . . . . . . .31
Use
- Food protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Use
- Freezing fresh food - Storage of frozen food - Thawing - Ice-cube production Movable shelves . . . . . . .
Positioning the door shelves - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Hints
- Hints for refrigeration - Hints for freezing - Hints for storage of frozen food -
Freezing calandar
. . . . . .34
Maintenance
- Periods of no operation - Periodic cleaning - Interior light - Defrosting . . . . . . . . . . . . . . . . .35
Customer service and spare parts
-
Technical information -
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Installation
- Location - Shelf-holders - Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Installation
- Building-in instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Installation
- Inner door reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
•
Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.
Installation
• During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the instructions.
Attention: keep ventilation openings clear of
obstruction.
• Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important:
if the supply cord is damaged, it must
be replaced by a special cord or assembly availa-
ble from the manufacturer or its service agent.
• If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to
wait at least two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
• There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
• Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol
are recyclable.
Disposal of old Appliances
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased
the product.
