Note
Never remove or cover labels and data plates affixed
to the appliances. Labels and data plates must be
legible throughout the entire lifetime of the appliance.
Immediately replace damaged or illegible instructions
and warning stickers.
Note
Remove the casing only to perform maintenance and
repair work. Put the casing back in place after mainte
nance and repair work.
Warning
Only qualified persons are authorised to assemble, in
stall and maintain the installation.
Warning
The hybrid heat pump (heat pump and boiler) must be
disassembled and disposed of by a qualified installer
in accordance with local and national regulations.
Warning
If the mains lead is damaged, it must be replaced by
the original manufacturer, the manufacturer's dealer
or another suitably skilled person to prevent hazard
ous situations from arising.
Caution
The hybrid system should be in Summer or Frost Pro
tection mode rather than switched off to guarantee the
following functions:
Anti blocking of pumps
Frost Protection
Note
Regularly check the presence of water and pressure
in the heating installation.
Note
Keep this document close to the place where the ap
pliance is installed.
Caution
Do not make any modifications to the hybrid system
without the written consent of the manufacturer.
Caution
Do not neglect to service the hybrid system. Contact a
qualified professional or take out a maintenance con
tract for the annual servicing of the hybrid system.
1 Safety
8
7611444 - v02 - 11122015