Dedicated Micros DV-IP NV8, Руководство по установке

Страница: 118 / 242

118
DV-IP NV8
118
Enable-N/C Select if the Keyswitch is to be normally closed (SET). Then
choose a contact to be used in a specific zone as the Keyswitch.
Enable EOL Select to configure the Keyswitch for EOL. The End Of Line
(EOL) option enables the Keyswitch to detect any changes in the
electronic input resistance. A change outside the expected values
will result in a Tamper Alarm (short circuit or open circuit) being
detected and the system switching to alarm mode.
With Keyswitch Disabled
Day Specifies which Day of the week is being configured
NOTE: The next two descriptions utilise the standard name settings for the profiles (SET, UNSET).
If these names have been changed on the ‘Schedule’ page, these menu options will display
the user configured names.
UNSET Time Specifies what time in format HH:MM the UNSET recording
settings, configured on the Profile Recording page, will become
operational
SET Time Specifies what time in format HH:MM the SET recording settings,
configured on the Profile Recording page, will become operational
Note: The arrow button displayed next to each textbox allows settings to be replicated for those
cameras listed below. This will only affect the adjacent option i.e. Mode arrow will replicate
the Mode setting to all cameras below the clicked arrow.
Note: To disable one day, set both times to 00.00. To have the profile recording all 24 hours of a
day, set both times to 24.00