Dedicated Micros DV-IP NV8, Руководство по установке

Страница: 111 / 242

111
NV1
Installation Guide
111
AoE Setup
This menu allows configuration of the units ATA over Ethernet (AoE) function. AoE is a network
protocol designed for simple high-performance access of storage devices over Ethernet networks.
Importantly the external storage device must be located on the same network as the unit. AoE does
not rely on network layers such as IP and TCP, making it non routeable i.e. routers cannot be used
to forward a packet across disparate networks. AoE packets can only travel within a single local
Ethernet storage area network (adds a physical layer of security to the information). The stored
video can only be accessed by plugging directly into an Ethernet socket in the same LAN as the
host. This means AoE cannot be accessed over the Internet or other IP networks, but makes AoE
more lightweight (with less load on the host), easier to implement, provides a layer of inherent
security, and offers higher performance.
IMPORTANT: Use the ‘Record Settings->Video Storage’ page to configure storage for use by the
NVR. This will add all the files required for this function.
Note: Refer to ‘Viewer Menu->Copy Menu’ for guidance on exporting Event data via the unit’s
USB port.
Note: Refer to the 16 Bay RAID Installation & Operation (MI-I-CRAID-E1-0) for guidance on
utilising a Dedicated Micros RAID storage unit.
Logical Devices Connected AOE Devices - Any devices in this panel are being
used by the unit to store data. These can be freed by clicking on
the Release button.
Physical Devices Available AOE Devices - Any devices in this panel are available
on the network. They can be added to the storage capability of this
unit by ‘claiming’ the storage, using the ‘Claim’ button. Unavailable
storage is listed as Owned. Claimed storage capacity requires
formatting before it can be used.