Dedicated Micros DV-IP NV8, Руководство по установке

Страница: 11 / 242

11
NV1
Installation Guide
11
Installation
Front Panel connections
Data
DVD-R Internal DVD-R drive (located under hinged flap)
USB USB2.0 connector (located under hinged flap)
LED’s Power - The Power LED will be green to indicate power is connected to the unit
HDD (Hard Disk Drive) - This will flash when images are being stored to the hard disk
Network - The Network LED will be green to indicate a connection
Rear Panel connections
KBD
USB ETH-0
AUX AUD1
IN
VID 1 MON
B
VID 2 VID 3
SATA1
OUT
A
VID 8 VID 6 VID 4 VID 5 VID 7
ALARMS
RELAYS
SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ
AUX AUD2
IN
OUT
EXP
O
I
IR
SATA2
ETH-1
HDMI 1
AUD 1
AUD 2 AUD 3 AUD 4 AUD 5 AUD 6 AUD 7 AUD 8
HDMI 2
ETH-D ETH-C
ETH-B ETH-A
VID 9 VID 10 VID 11 VID 16 VID 14 VID 12 VID 13 VID 15
AUD 9 AUD 10 AUD 11 AUD 12 AUD 13 AUD 14 AUD 15 AUD 16
Video
CAM1 to CAM16 75Ω BNC composite video input, 1V pk-pk
MON A 75Ω BNC composite monitor output, 1V pk-pk
MON B Spot Monitor output
HDMI x2 High-Definition Multimedia Interface connector
(1 Main, 1 Digital Spot)
Audio
AUX AUD IN x2 3.5mm (phono) socket, 8KHz/16KHz/22KHz sampling 75Ω input
impedance, 1V pk-pk
AUX AUD OUT x2 3.5mm (phono) socket, line level <100Ω output impedance,1V
pk-pk amplification required
AUD 1-16 16 RCA (phono) sockets for each camera channel
Note: Audio channels are assigned to camera ports via the ‘Per Codec Audio’ menu;
Configuration Menu->System Settings->Per Codec Audio.