Dedicated Micros DV-IP HD, Инструкция по установке и эксплуатации

Страница: 72 / 128

draft
Dedicated Micros ©2008
D
V-IP HD
Network
This menu allows additional network settings to be configured if required.
Server Name
This field can be edited to allocate a name to the unit. This would
be used if accessing the unit via a Domain Name Server (DNS). It
would also be displayed in NetVu ObserVer and when transmitting
information to Remote Video Response Centres.
IP Address
This is the IP address allocated to the unit.
Sub Net This is the subnet of the network where the unit is located.
Gateway This is the IP address of the default gateway (router).
Primary DNS This is the primary DNS server IP address for applications utilising
domain names.
Max Transmission Rate This shows the maximum transmission speed for the network type
being used.
Force 10BaseT operation The unit supports 10 or 100BaseT half duplex transmission.
Selecting this option will force the unit to operate at a 10BaseT
connection.
Tx Image Buffers This is used in order to improve the picture delivery over Ethernet
when using a slow connection i.e. 256Kbps. A buffer setting of 1,2
or 3 is available.
Ethernet MTU This is the maximum transmit unit for the Ethernet packet. The
MTU is the largest physical packet size measured in bytes that the
network can transmit. By default this figure is set to 1500bytes.
Mx Transmission Timeout ms This is the time (in milliseconds) the unit will wait to re-send a
packet if an acknowledgement is not received.
PPP Idle Line Timeout s This is the time (in seconds) the unit will wait before disconnecting
the PPP (Point to Point Protocol) link if data has not been
transmitted or received.