deconta ME 12, Оригинальное руководство пользователя

Страница: 10 / 16

Instruction manual
Mobile Deduster ME 12
Version 1 Seite 10
6. Initial operation
The Mobile Deduster ME12 is supplied ex works and is in a ready-to-use state.
In case of visible damages, do not operate the unit. Please contact deconta GmbH
immediately.

Determine the location of the Deduster. Choose it close to the working area to avoid
unnecessary long hoses and loss of power.

Connect suction line of Deduster to working area.

Establish power supply to Deduster (400V 32A 3N PE)

Switch on Main switch, make sure the Lamp „Mains Ok“ lights up

Switch on „Fan“ („Fan active“ lights up) and wait until the motor is running

Switch on „Cleaning“ („Cleaning active“ lights up). When an external Compressor is
connected the lamp “Compressed air external” lights up.

The unit is operating!

The desired performance can be set, by turning the rotary knob „Fan control“.
Main switch
Mounted plug
Mains OK
Fan active
Fan ON/OFF
Fan control
Filter control
1. Filter stage
(regenerative Filter)
Filter control
2. Filter stage
(HEPA Filter)
Cleaning active
Operating hours
Compressor
Cleaning ON/OFF
Operating hours
Fan
Compressed air
external