background image

Instruction manual 

Mobile Deduster ME 12 

 

Version 1 

Seite 6 

 

2.1.2. Uncoupling 

  Wind down support wheel 

  Release both breakaway cable and light connector 

  Pull stabilisation handle (Pos.1) upwards 

  Pull coupling handle (Pos.2) forcibly upwards 

  Lift coupling off trailer ball of towing vehicle  

 

Safety instructions:

 

The trailer coupling may only be operated by one person when opened and closed. 
 

2.2. Storage 

To avoid any damages the unit may only be parked in areas inaccessible for 
unauthorized persons. 
 
 

3. Volume of delivery 

 
Regardless if the unit is purchased or rented, unless no other agreements have been 
made, the volume of delivery of the Mobile Deduster consists of: 
 

  Unit ME 12 

 Instruction 

manual 

 Stoppers 

 
 

Return delivery after ending of rental period 

 
For the protection of our clients and in accordance with the rules for hazmat transport, we 
must insist on the following return delivery conditions: 

 

  complete as stated above  

  thoroughly cleaned (ready-to-operate), with emptied dust bunker 

  free from any adhesive residue 

  without fibre binding 

 without 

damages 

 

 

Содержание ME 12

















Отзывы: