Instruction manual
Mobile Deduster ME 12
Version 1
Seite 3
The copyright of this instruction manual remains with
deconta.
This manual is intended for assembly,
operation and maintenance personnel. It contains instructions and drafts of technical nature which may
neither be distributed nor used in any unauthorised way for competitive purposes or passed on to others.
1. Basic safety advice
The operation of the equipment must only be carried out by trained competent personnel.
The information and instructions contained within this publication are of paramount
importance to the user.
The manual is always to be kept in the immediate proximity, accessible to all personnel.
deconta
insists as the equipment user you follow the information and instruction
contained within the handbook and only use it in accordance with the regulations and
never use this Unit in an inappropriate way. In the event of non-observance,
deconta
assumes no liability.
To ensure safe operation of the NPU, the following must be strictly observed:
Do not use in potentially explosive atmospheres.
Maintenance work, including removal and replacement of the filters, may only be
carried out by authorized persons wearing suitable protective clothing.
The device must be completely disconnected from the power supply during all
repairs and maintenance work.
The safety and protective systems must be maintained and functioning correctly.
Safety instructions affixed to the unit must be maintained in a legible condition and
must be adhered to.
General, legal and other binding regulations and procedures for accident
prevention and handling of hazardous substances must be observed.
To ensure safety, modifications to the device are not permitted.
To avoid damage, never operate the unit without built-in filters.
ATTENTION!
The Mobile Deduster is not suitable for use in condensing, corrosive, flammable
and explosive atmospheres.
The ambient and medium temperature must not exceed 60 ° C.
We explicitly point out the additional regional and national safety measures and
regulations for the operation of the appliance technology.
The operator must carry out the inspection of the exhaust air at initial acceptance as well
as at a minimum gap of 3 years.
In addition to the instruction manual, general, legal and other binding regulations on
accident prevention and environmental protection must be observed.
