Deckma Hamburg OMD-2008, Инструкция по эксплуатации, Страница: 3 / 100

Page: 2 of 102
Safety hazard
Mechanical Risks
Risk of hand injuries
While closing the front cover hand injuries could be possible.
Electrical Risks
Electrical voltage warnings
Incorrect commissioning and wiring, touching live parts, and cable
breakage or faulty components can lead to electrical hazards.
Thermal Risk
Risk of scalding
High temperatures can occur on the surface of the measuring cell. Hot
water may spill and cause scalding.
Chemical Risk
Risk of chemicals
Material used during cleaning and maintenance can cause eye and skin
irritation.
Risk reduction
Risks Recommended reduction
Risk level
(1)Low –
(3)High
Risk of hand
injuries. While opening and closing the front cover care must be
taken.
1
Electrical risks.
Works on the units should be only be done by a qualified
person. Keep Terminal Cover closed at all times.
3
Risks of
scalding.
It is recommended to wear protective clothing in the form of
heat-resistant gloves and protective goggles, if high
temperature sample is present.
1
High
temperature
risks. Do not open the cell cap until the sample water has cooled
down sufficiently. Stop any sample water flow prior to
opening the head screw.
2
Unexpected
movement of
the wiper piston. Close pressurized air supply before working on the
Autoclean System or dismantling the Autoclean System.
2
Chemical Risk.
Material used for Cleaning and Maintenance may cause
eye and skin irritation. Cleaning solution may cause health
problems if ingested.
1
Risk of
environmental
damage. Use instrument strictly within its specification. Keep
instrument properly maintained.
1
Risk of health
damage. Do not touch or ingest any residue from sample stream.
2