MDEK1001 Kit User Manual
© Decawave 2017
OP-MDEK1001-System-User-Manual-1.0
Page 26
o
POSITION
Position: The x,y,z co-ordinate of the anchor in the
grid. Will be automatically populated if this device participated in auto-
positioning.
X position
Y position
Z position
If in tag mode:
o
STATIONARY DETECTION:
Enables/disables motion sensor operation. If
disabled, then the stationary update rate will not be available.
o
RESPONSIVE MODE:
o
LOCATION ENGINE:
7.4.4 Tip: Label your Devices
It is often useful to label your devices so they can be easily identified on the Android
application
To do this uncheck the LED parameter
and tap ‘SAVE’. This will disable the
LEDs on that device, and enable the user to locate it in the room
The user can place a label on the enclosure of that device with an identifier such that
it can be quickly found in the application e.g. the device ID
When completed, the user can check the LED parameter and tap ‘SAVE’ to enable
the LEDs again.
