Decatur DragonEye Compact, Руководство пользователя

Страница: 30 / 40

D
ra
go
n
Ey
e C
om
p
ac
t
U
se
r’s
M
an
ua
l
30
vehicle frames can couple excessive vibration into the LIDAR unit
resulting in damage to internal components .
• Store the unit in a cool dry place when possible .
• Avoid temperature extremes beyond -22
º
F (-30
º
C) and 140
º
F
(60
º
C) . Avoid leaving the unit in excessively hot or cold areas
such as the dashboard of a car in summer or in the trunk on
extremely cold nights .
• Periodic cleaning of the front lenses or HUD glass is only
necessary if they acquire significant dirt or other debris
that limits optical transmission . If cleaning is necessary, use
compressed air or a soft brush to remove loose debris fist .
• To clean the optics, the glass surfaces should be cleaned with
water and a soft cloth or tissue . Isopropyl Alcohol (rubbing
alcohol) can be used if needed . Wipe from the center of the lens
outward in a spiral motion .
• The HUD glass may be cleaned with a cotton swab to facilitate
reaching the surfaces . If you encounter a stain or speck that cannot
be removed with gentle pressure, do not increase the cleaning
pressure as this may damage the lens coatings. Small scratches
and stains during the lifetime of a unit are normal and will not
noticeable affect the performance of the LIDAR.
• When cleaning the main body of the LIDAR use a soft clean cloth
and a mild soap and water solution . Do not use harsh cleansers
such as acetone (nail polish remover), ammonia, or other strong
cleaning solutions as these may damage the polymer housing
materials .
8.2 General Handling
The DragonEye Compact LIDAR is built to be rugged and endure
many types of accident impacts and drops . However, please
remember that much like a camera, the LIDAR is a precision optical
instrument that should be handled with reasonable care . Avoid
dropping or throwing the unit into the patrol car as hard surfaces can
scratch or break the glass components .