Decatur DragonEye Compact, Руководство пользователя

Страница: 26 / 40

D
ra
go
n
Ey
e C
om
p
ac
t
U
se
r’s
M
an
ua
l
26
Timed Distance
200
or
Shoot Object
Figure 6.6
Side Panel indicating Timed Distance Mode active
The operator may now enter the reference distance in feet (meters)
between the two reference objects using the up/down arrows
. Alternatively, the operator may shoot the two reference points
to determine the distance to be traveled .
• The reference distance must be at least 200 feet (60
meters) .
• If the operator elects to shoot the distance to the
reference objects, please ensure both reference points
are on one side of the operator and in a straight line
with the operator's position . The LIDAR will subtract
the two readings to determine the distance .
To shoot the distances, simply aim at the longer range reference
object first and pull the trigger to obtain a distance reading . Release
the trigger to lock in the distance reading . If you are not satisfied
with the reading, you may simply aim and shoot the first reference
object again . Once you are satisfied with the reading, press Enter
. The unit will prompt you to shoot the second reference object .
If the second reference object is located where you are standing
with the LIDAR, simply press Enter
. Otherwise shoot the second
reference object and press Enter when satisfied with the distance
reading . The unit will show the distance between the reference
objects .