Decatur DragonEye Compact, Руководство пользователя

Страница: 17 / 40

D
ra
go
n
Ey
e C
om
p
ac
t
U
se
r’s
M
an
ua
l
17
• If the LIDAR is inactive for approximately 30 seconds,
it will automatically transition into sleep mode to
conserve battery life . If this happens, simply click the
fire trigger again to wake up the unit .
5.3 Selecting Speed Mode
The LIDAR will normally power up in "Speed" mode, unless it was
recently used in a different mode . If "Speed" mode is not displayed
on power up, simply press
until the side panel displays:
MPH
FT
Figure 5.3
Side Panel indicating Speed Mode is active
5.4 Using the HUD Sighting System
The Head-Up display provides a precision aiming reticle, speed
reading, and other status information . To find the sighting reticle,
press and release the trigger to wake up the LIDAR and look directly
through the HUD letting your eyes focus on a target well in front of
the LIDAR unit . If you haven't used a HUD device before, it might take
a minute or two for your eyes to adjust the first time .
Figure 5.4
HUD aiming