background image

06

 The correct powder should look like salt.

 If the powder is too finely ground, it may cause the coffee to 

flow intermittently or fail to brew coffee.

 If the powder is too coarse, the water will flow through the 

coffee too quickly, which will affect aroma and taste of the 

extracted coffee

 You can adjust the thickness of the ground coffee powder by 

adjusting the coffee bean box, which will vary depending on 

the type and quality of the coffee beans you use, so you need 

to make appropriate adjustments to achieve the best results.

 Fresh roasted coffee beans (within 1 month), the grinding 

position is set between 5-10, the double-cup grinder produces 

about 19g of powder and the single-cup of 13g, this wil bring 

relatively good coffee extraction effect.

 In order to prevent the coffee beans from getting wet, affecting 

the grinding and the final coffee taste and effect, please do 

not put too much coffee beans in the bean box.

 In order to obtain a uniform and consistent coffee powder, be 

sure to adjust the grinding degree  according to the type and 

quality of coffee beans to obtain a cup of high-quality coffee.

OPERATIONAL INSTRUCTION

 Brewing coffee, function of hot water and steam.

 Fill the water tank with drinking water, the water level 

should not exceed the "max" position.

 Plug in the power and press the ON/OFF button (make sure 

the knob is at twelve o'clock position), then the machine 

enters into preheating mode. The specific operation is as 

follows:

 There’re 3 indicator lights around the knob, on the left is 

the indicator for hot water, on the right is the indicator 

for steam. Indicator lights in different states show various 

working modes of the machine. Coffee brewing, hot water 

and steam function cannot work at the same time, only 

one funtion can work in one time. 

 Warm up: Press the ON/OFF button once, the whole 

machine enters into warm-up mode, ON/OFF indicator 

light   flashes in the form of breathing light; at the same 

time grind indicator light 

 Light up;

 Standby state: When the whole machine is warmed up, it 

enters into standby mode, except clean/preheat indicator 
light 

on the right (Clean /preheat indicator), all the lights 

are on, and all functions of the coffee machine can be used 

normally.

 Brew a single-cup of coffee: In the standby mode, install 

Содержание KUCF010M

























Отзывы: