10
Figure 2: align the positions in red circles in the
figure, and press it down, rotate it clockwise and
install it into the machine.
There’re markings to show the coffee coarseness on bean box,
see Figure 3. To make the coffee coarseness you prefer, make
sure the coffee coarseness setting you want on bean box is
aligned with the mark position on the top cover (as shown in
Figure 4).
Figure 4
Figure 3: from 0 to 30, coffee power is
from fine to coarse. Bigger number for
coarser coffee powder.
1.Maker sure the bean box is installed in place, and the bean
box indicator (on the left side of control panel) turns from red
light to extinguish, grinder is ready for use.
2.Add appropriate amount of coffee beans in the bean box. To
prevent coffee beans from getting wet, affecting the grinding
and the final coffee taste and effect, please do not put too
many coffee beans in the bean box;
3.As shown in Figure 5, put the funnel with single-cup filter or
double-cup filter into the powder receiving bracket, as shown
in Figure 5.
4.Press GRIND button to start grinding and it will automatically
stop after reaching the set grinding amount. You can also
operate the grind button to stop halfway.
Note: The bean grinding time is set to a double-cup size, and
the grinding machine produces about 19g (about 14 seconds)
of powder at 5-10 coarse degree, which has a relatively good
coffee extraction effect.
If you use a single-cup filter, you need to manually control
Figure 5
