DEC LA30N, Руководство пользователя

Страница: 83 / 193

4-27
Using Set-Up Mode
INSTALL
Options Values Description
<BUFFER>
Assign buffer memory as the input buffer.
2 KBYTE
2K bytes
8 KBYTE
8K bytes
16 KBYTE
16K bytes
32 KBYTE 32K bytes
64 KBYTE 64K bytes
Note:
The larger the input buffer selected, the smaller
the download buffer reduced. Even with 64K
bytes of input buffer, a minimal download buffer
is provided. If you need a larger capacity for
downloading fonts, reduce the input buffer.
<I/F TYPE>
Select the type of interface to the computer.
PARALLEL
Centronics parallel interface
SERIAL
DEC-423 serial interface
AUTO
Both interfaces are ready for communication. The
printer communicates with the interface from which it
first receives data. The interface is active until the
input buffer becomes empty.
<AUTO SW>
Specify the timing of regarding the selected protocol
or interface as being inactive when
AUTO
is specified
in the
<PROTOCOL>
or
<I/F TYPE>
option.
2 SEC 2 seconds elapsed after data stops from the computer.
4 SEC
4 seconds elapsed after data stops from the computer.
6 SEC
6 seconds elapsed after data stops from the computer.
8 SEC
8 seconds elapsed after data stops from the computer.
10 SEC
10 seconds elapsed after data stops from the computer.
12 SEC 12 seconds elapsed after data stops from the computer.
14 SEC
14 seconds elapsed after data stops from the computer.
16 SEC
16 seconds elapsed after data stops from the computer.
18 SEC
18 seconds elapsed after data stops from the computer.
20 SEC 20 seconds elapsed after data stops from the computer.
(Interface Type)
(Auto Switch)
#04 Chapter 4 24/05/96, 10:31 27