manualshive.com logo in svg

DEC LA30N, Руководство пользователя

Поделиться
Скачать
DEC LA30N Скачать руководство пользователя страница 70

4-14

Using Set-Up Mode

Function

Option

Value

INSTALL

If you have a serial interface, the serial interface
options selected on the printer must be the same as
the settings you selected using your software or your
computer operating system.  If the settings are not the
same, the printer will not print or will print garbage.

See the section “Changing Install Options” later in
this chapter.

TESTS

None

See the section “Using Diagnostic Functions” later in
this chapter.

MENU-ACCES

None

You can inhibit the Set-Up functions from being
accessed from the control panel.

Changing Macro 1 and Macro 2 Options

The 

MACRO 1

 and 

MACRO 2

 functions allow you to use two sets of different print options

according to your application software.  You can easily switch between 

MACRO 1

 and

MACRO 2

 in Normal mode as described in Chapter 3 “Printing.”

With the factory setting, 

MACRO 1

 is invoked when you first turn the printer on.  The

Macro selection changed is permanently retained in the printer.

Select the same protocol on the printer as is selected in your software.  If the protocols are
not the same, the printer will not work correctly with your software.  If you plan to use two
different protocols on a regular basis, assign the most frequently used protocol to 

MACRO 1

.

Assign the second protocol to 

MACRO 2

.  All of the other settings available for 

MACRO 1

and 

MACRO 2

 are optional.  Some of the options and values will vary with the protocol.

To determine which features your software supports, refer to your software documentation.

The following table describes the 

MACRO 1

 and 

MACRO 2

 options and values.  Both

functions offer the same options and values.  The options in the table are listed in the order
in which they are printed.  Not all options are defined for all protocols and some values vary
with the protocol.

For the procedure for changing the 

MACRO 1

 and 

MACRO 2

 options, see the previous

sections in this chapter.

BAUD RATE

BIT&PARITY

BUFFER CTL

DISC FAULT

#04 Chapter 4

24/05/96, 10:30

14

Содержание LA30N


































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды