DEC LA30N, Руководство пользователя

Страница: 138 / 193

C-22
Command Sets
Function Command
IBM Proprinter X24E and XL24E Quick Reference Guide
This section describes the printer commands for the IBM Proprinter X24E and XL24E
protocol. When there is a difference, it is identified by LA30N (X24E) and LA30W
(XL24E). Asterisks in the “Function” column indicate extended commands that are not
supported by the original printer. See the Programmer’s Reference Manual for detailed
information on using these commands.
Function Command
Print Mode Control
Double-strike (bold) printing on
ESC G
Double-strike (bold) printing off ESC H
Emphasized (shaded) printing on ESC E
Emphasized (shaded) printing off ESC F
Single-line double-width characters on SO or ESC SO
Single-line double-width characters off DC4
Double-width characters on/off ESC W (n)
(on: n = 1, off: n = 0)
Double-height/double-width characters ESC [ @ (n
1
) (n
2
) (m
1
) ... (m
4
)
n
1
= 4, n
2
= 0, m
1
= 0, m
2
= 0
m
3
controls character height and line spacing:
m
3
Height Spacing
0 Unchanged Unchanged
1 Normal Unchanged
2 Double Unchanged
16 Unchanged Single
17 Normal Single
18 Double Single
32 Unchanged Double
33 Normal Double
34 Double Double
m
4
controls character width:
m
4
Width
0 Unchanged
1 Normal
2 Double
Condensed characters on SI or ESC SI
Condensed and elite characters off DC2
Subscript or superscript printing on ESC S (n)
(subscript: n = 1, superscript: n = 0)
Subscript and superscript printing off ESC T
Underline on/off (on: n = 1, off: n = 0) ESC - (n)
Overline on/off (on: n = 1, off: n = 0) ESC (n)
#C Appendix C 23/05/96, 15:07 22