5
g.
Place filter pan cover onto the filter pan
assembly.
h.
Roll the filter into position, either inside
the fryer for built-in operations, or
position the filter underneath the fryer
drain valve for portable operations.
i.
Prior to connecting the oil return lines,
ensure the filter switch is “OFF”.
j.
Then connect the oil return line to the
fryer’s oil return line quick disconnect
coupling.
Magnum Filter Leaf Kit:
a.
Place the Magnum Filter Leaf in the
bottom of filter pan. Ensure oil intake
pipe is aligned properly with the opening
on the filter pan lid.
b.
Sprinkle Magnasol powder into oil in the
fry vessel. Do not sprinkle Magnasol
powder in the filter unit as this will clog
the oil intake in the filter pan bottom.
c.
Place filter pan cover onto the filter pan
assembly.
d.
Roll the filter into position inside the
fryer.
e.
Before connecting the oil return lines,
ensure the filter switch is “OFF” and the
power cord is disconnected from the
power source.
f.
Connect the oil return line connector to
the fryer’s oil return line quick disconnect
coupling.
3.3
INSTALLING THE FILTER IN
THE FRYER:
a.
Slide the filter inside the fryer cabinet.
b.
Connect the filter’s oil return line (male
quick disconnect) into the quick
disconnect (female) in the fryer’s return
line. See figure 3-3.
Installing crumb catcher screen.
Figure 3-2
Location of Quick Disconnects
Figure 3-3
