ASSEMBLY GUIDE – STAGE 44
Front upper arm
Parts supplied:
A
Front upper arm
B
Ball-headed screw
C
Pins
D
Bearing (large)
E
Bearing (small)
F
Locknut
The parts supplied with this stage are components for the front suspension. The front upper arm, ball-headed
screw and locknut are identical to those provided in Stage 4, and the bearings are the same as those supplied
with Stage 8. All of these parts can be used on either side of the model. The parts supplied with Stage 21 – the
rear driveshaft, stub axle, drive pin, hexagonal drive washer and flanged nut –aren’t actually specific to the
rear suspension and so they can also be used on the front wheels. Therefore, in this stage, you can complete
the suspension for the left front wheel by using a ball-headed screw, locknut and pin, all supplied with this
stage, plus the upper arm and hub carrier assembly from Stage 4 and the parts from Stage 21.
1
Prepare the ball-
headed screw, locknut
and one of the pins. You
will also need a
screwdriver and two
Allen keys, a 2.5mm
and a 5mm.
A
B
C
D
E
F
121
1
