Data Device Corporation
BU-67121W Manual
Rev B – 6/16
42
8
CONNECTORS AND PINOUTS
The BU-67121Wx
is a lab grade box. When using the BU-67121Wx, the following
should be observed:
•
ALWAYS
take proper precautions to guard against static damage.
•
ENSURE
power adaptor is properly connected to device.
8.1 Introduction to the I/O Connectors
As seen in Figure , the AIC includes six front-panel I/O connectors, J1 through J6. As
well as a 10/100/1000 Ethernet port and two USB 2.0 ports.
Depending on how you configure your AIC, each connector may include a different
set of signals for the cards installed in the device.
J1, a 15-pin D-Sub, includes the signals for the Mini PCI-e Site A.
J2, a 9-pin D-Sub, also includes signals for the Mini PCI-e Site A.
J3, 15-pin D-Sub, includes signals for the Mini PCI-e Site B.
J4, 9-pin D-Sub, also includes the signals for the Mini PCI-e Site B.
J5 and J6 will have a closed bezel (as pictured in Figure .) until user chooses to
install PMC cards. The user can unscrew the bezels exposing a slot for a front I/O
PMC card to interface with.
Figure 36. BU-67121WX Front Panel Connectors